Skip to content
English
Contact us
Go to AP Lazer
  • There are no suggestions because the search field is empty.

Measuring Voltage of 36V DC Power Supply

How to measure voltage of the DC power supply using a multimeter.

To probe the 36 volt DC power supply you will first need to locate a multimeter with the ability to check for DC power. Below are symbols that represent AC and DC voltage.

Hook your black cable to the COM and your red wire to the VΩmA port (sometimes denoted as mAVΩ) is simply an acronym for voltage, resistance, and current (in milliamps).

Locate your 36 Volt DC power supply in the back cabinet.

Locate the wires on the right and side of the power supply.

To probe you will need to probe the top red and top black, middle red middle black, and bottom red and bottom black. 

You should be getting 36 or higher out of each port.